2018/09/30
ディスクスペースを拡張してみる@VMware
VMware はディスクスペースを簡単に拡張できるが、拡張しても実際のディスクスペースは OS 側で拡張しなければならない。
# 拡張しないと「空きスペース」として扱われる。

★OS
% uname -a
FreeBSD leviathan-vmw 11.2-RELEASE-p3 FreeBSD 11.2-RELEASE-p3 #0:
 Thu Sep  6 06:42:08 UTC 2018
  root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  i386
★拡張前
% fdisk ada3
******* Working on device /dev/ada3 *******
parameters extracted from in-core disklabel are:
cylinders=22192 heads=15 sectors/track=63 (945 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=22192 heads=15 sectors/track=63 (945 blks/cyl)

fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    start 63, size 20971377 (10239 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 687/ head 14/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
★VMwareで拡張後
cylinders が増えたことを確認する。
% fdisk ada3
******* Working on device /dev/ada3 *******
parameters extracted from in-core disklabel are:
cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    start 63, size 20971377 (10239 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 687/ head 14/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
さて拡張作業。
% sudo fdisk -u ada3
******* Working on device /dev/ada3 *******
parameters extracted from in-core disklabel are:
cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl)
↑★ここの cylinders と blks/cyl をかけ算する。44384x945=41942880 Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl) Do you want to change our idea of what BIOS thinks ? [n] ↑★リターン空打ちで[]内の返答となる Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 20971377 (10239 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 687/ head 14/ sector 63 Do you want to change it? [n] y ★パーティション1を編集する Supply a decimal value for "sysid (165=FreeBSD)" [165] Supply a decimal value for "start" [63] Supply a decimal value for "size" [20971377] 41942817
↑★計算した数字から start の 63 を引いた数字を入れる Explicitly specify beg/end address ? [n] sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 41942817 (20479 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 351/ head 14/ sector 63 Are we happy with this entry? [n] y ★適用 The data for partition 2 is: <UNUSED> Do you want to change it? [n] The data for partition 3 is: <UNUSED> Do you want to change it? [n] The data for partition 4 is: <UNUSED> Do you want to change it? [n] Partition 1 is marked active Do you want to change the active partition? [n] We haven't changed the partition table yet. This is your last chance. parameters extracted from in-core disklabel are: cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=44384 heads=15 sectors/track=63 (945 blks/cyl) Information from DOS bootblock is: 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 41942817 (20479 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 351/ head 14/ sector 63 2: <UNUSED> 3: <UNUSED> 4: <UNUSED> Should we write new partition table? [n] y ★適用
この後が超重要。
bsdlabel のオプションは -e (EDIT:編集) を使うこと。
間違って-wしないように!!
やっちまうとパーティション情報がバラバラになるかもしれない。

一応単一パーティションだと問題はなかった (元通りにしたら中が見える) が、あまり良い事では無さそう。
% sudo bsdlabel -e /dev/ada3s1
# /dev/ada3s1:
8 partitions:
#          size     offset    fstype   [fsize bsize bps/cpg]
  c:   20971377          0    unused        0     0     # "raw" part, don't edit
  d:   20971361         16    4.2BSD        0     0     0

↓

# /dev/ada3s1:
8 partitions:
#          size     offset    fstype   [fsize bsize bps/cpg]
  c:   41942817          0    unused        0     0     # "raw" part, don't edit
  d:   41942801         16    4.2BSD        0     0     0
c: には fdisk の size で入力した数値を指定。
d: にはその数値からオフセット分 (16) を引いた数値を指定。

この状態でも一応 mount は出来るが、まだ広げたところが使えないので 、広げた部分を newfs してくれる growfs を使う。
指定するデバイスは広げたパーティション。今回は /dev/ada3s1d。
% sudo growfs /dev/ada3s1d
It's strongly recommended to make a backup before growing the file system.
OK to grow filesystem on /dev/ada3s1d from 10GB to 20GB? [yes/no] yes  ←★ぶっ壊れる覚悟が出来たら "yes" で広げる。
super-block backups (for fsck_ffs -b #) at:
 21802624, 23085120, 24367616, 25650112, 26932608, 28215104, 29497600, 30780096, 32062592, 33345088, 34627584, 35910080,
 37192576, 38475072, 39757568, 41040064
これで df すると容量が増えてる。

念のためちゃんとバックアップは取っておきましょう。


最終:2018/10/01 00:27:44 カテゴリ:
タグ:鯖管理
  - NO COMMENT -
TrackBack URL:
QRコード
携帯サイト試験運用
https://griffonworks.net/nikki/cgi-bin/k.cgi
1行板

備忘録
  • 無し
物欲リスト
  • Canon RF50mm F1.2L USM
  • SIGMA 20mm F1.4 EF Art
  • ニンバス チヌーク
  • OCB-1 ST II
ツーリング ドライブ兼野外撮影予定リスト